SATELEC has always designed tips that respect the tooth's anatomy and vibrate in perfect harmony with the handpiece.
We don't deny that a brand X tip can be cheaper to buy than a genuine SATELEC tip but we would remind you that only genuine SATELEC tips have been designed specifically for use with our generators, and we strongly recommend them. Furthermore, brand X tips can be harder than tooth enamel, which could cause undesired wear, or even etching, of the tooth's surface. That's not all - you risk damaging the screw thread and electronics of your SATELEC handpiece. Last but certainly not least, even a slight physical or electronic incompatibility could cause a brand X tip to break ... with a risk of ingestion by the patient.
Understandably, SATELEC's liability - both legal and with regard to warranty of parts and accessories - cannot be engaged for damages that arise form the use of any other than genuine SATELEC accessories.
High frequency generator, the Servotome uses a fully rectified, filtered current that provides the best possible performance : electrosection with smooth cuts and no side effects for enhanced, quality tissue healing.
In coagulation mode, lower current efficiency at the surgical site and controlled heat dispersal provide the desired hemostasis with no damage to adjacent tissues.
Thanks to different electrodes with graduated hemostatic effect, the Servotome allows for incisions, excisions, coagulating incisions, fulgurations and coagulations.
Surgical applications :
. gingivectomy
. gingivoplasty
. frenectomy
. abscess incision
. crown lenthening
. removal of hypertrophied tissue, etc...
More about :
http://www.dental-bone-surgery.com/satelec-equipment/servotome.php
Power supply : 230V – 50/60Hz (115V optional).
Power consumption : 230 VA
Classification : I, type BF.
Output Power : 50W max / 375 ohms impedance
Useful output impedance range : 50 ohms to 2 Kohms
Output Frequency : 1.8 MHz ±0.7 MHz
Incision and coagulation settings : 1 to 10
Maximum output voltage :
725 V peak to peak at P = 10, W = 1
Fuses : two 5 mm x 20 mm time-delay fuses : 2 x 1.25 AT (230 V AC) / 2 x 2 AT (115 V AC)
One 5 mm x 20 mm internal time-delay fuse : 500 mAT ref F1 on the printed circuit (not user-accesible)
Size : 250x240x110mm.
Weight : 1.2kg.
Working temperature : 10 to 40°C
Working relative humidity : 30 to 75°C
Storage/transport temperature : -40 to +70°C
Storage relative humidity : 10 to 100 %